> For clean Markdown of any page, append .md to the page URL.
> For a complete documentation index, see https://help.mywonder.in/llms.txt.
> For AI client integration (Claude Code, Cursor, etc.), connect to the MCP server at https://help.mywonder.in/_mcp/server.

# Connect with the Pod hotspot

If you prefer, you can set up Wi-Fi from any phone, tablet or laptop browser using the Pod's built-in hotspot.

#### Turn on the Pod hotspot

Press and hold the **left button** for **5 seconds**. The LED eyes turn **blue**, which means the hotspot is on.

#### Join the Pod's Wi-Fi network

1. Open Wi-Fi settings on your phone, tablet or laptop.
2. Look for a network named `MYWONDER_<device_id>`. The device ID is the serial number printed on the bottom of your Pod.
3. Connect to this network.

#### Open the setup page

On the same phone, tablet or laptop, open a browser and go to [http://192.168.10.10](http://192.168.10.10).

#### Choose your home Wi-Fi

1. Click **Scan Networks** to see the Wi-Fi networks available.
2. Select the Wi-Fi network (SSID) you want the Pod to use.
3. Enter your Wi-Fi password.

#### Save and connect

Save and wait for the Pod to connect. The LEDs blink **green**, then turn **white** when the connection succeeds.

Once connected:

* The Wi-Fi details are saved on the Pod.
* The hotspot turns off automatically after about 2 minutes.

> **Tip**
>
> Wi-Fi passwords are case-sensitive. If the Pod doesn't connect, check the password and move the Pod closer to your router. See [Wi-Fi troubleshooting](/wifi-troubleshooting).