Skip to navigation
Wi-Fi & Bluetooth

Connect with the Pod hotspot

Set up Wi-Fi manually using the Pod’s built-in hotspot.

View as Markdown

If you prefer, you can set up Wi-Fi from any phone, tablet or laptop browser using the Pod’s built-in hotspot.

1

Turn on the Pod hotspot

Press and hold the left button for 5 seconds. The LED eyes turn blue, which means the hotspot is on.

2

Join the Pod's Wi-Fi network

  1. Open Wi-Fi settings on your phone, tablet or laptop.
  2. Look for a network named MYWONDER_<device_id>. The device ID is the serial number printed on the bottom of your Pod.
  3. Connect to this network.
3

Open the setup page

On the same phone, tablet or laptop, open a browser and go to http://192.168.10.10.

4

Choose your home Wi-Fi

  1. Click Scan Networks to see the Wi-Fi networks available.
  2. Select the Wi-Fi network (SSID) you want the Pod to use.
  3. Enter your Wi-Fi password.
5

Save and connect

Save and wait for the Pod to connect. The LEDs blink green, then turn white when the connection succeeds.

Once connected:

  • The Wi-Fi details are saved on the Pod.
  • The hotspot turns off automatically after about 2 minutes.

Wi-Fi passwords are case-sensitive. If the Pod doesn’t connect, check the password and move the Pod closer to your router. See Wi-Fi troubleshooting.